Free Energy Mini Romag Generator

The Mini Romag Generator ROTOR

2010-03-17T10:48:00.005+11:00

Mini Romag Generator Diagram

2007-11-07T06:05:00.001+11:00

This Diagram was found original from unknow source in internet but it seem to be lineup exactly with jean luis naudin diagram.

Mini-Romag Generator by Jean-Louis Naudin

2007-11-04T05:04:00.000+11:00

The Mini-Romag Generator

Design and Drawings by Jean-Louis Naudin
Courtesy of Kevin O. from "Magnetic Energy"
created on 03-19-99 - JLN Labs - last update on 11-15-99

Part list for 50Hp Romag Generator

2007-10-31T19:21:00.001+11:00

Parts list for Romag-Generator

1) ALUMINUM BASE PLATE, 21" DIA., 1/2" THICK WITH 1-3/8" BORE. THE PURPOSE FOR THIS EXTENDED BASE DESIGN IS TO BALANCE OUT THE STRUCTURE WHICH THEN EQUALIZES THE MAGNETIC FLOW.

2) ALUMINUM TUBE SECURED TO PART #1 MEASURING 21/2" O.D.,1 3/8" I.D. BY 1" THICK

3) BOTTOM BRONZE BUSHING, 1-3/4" LONG, 1-3/8" O.D. BY 1" I.D.

4) A TEFLON THRUST WASHER, 1" I.D., 21/2" O.D. BY 1/4" THICK

5) A 1-3/4" LONG BY 7/8" I.D., BY 1" O.D. TEFLON SLEAVE BEARING, GLASS FILLED (BOSTON GEAR) PRESSED ONTO CENTER SHAFT.

6) CENTER BRASS SHAFT, 14" LONG, 1" DIA., MACHINED AT ENDS TO 7/8" DIA.

7) TOP COVER PLATE, 17-5/8" O.D., 1/2" THICK WITH A CENTER BORE OF 1-3/8" MADE OF CAST SEMI- RED BRASS. DESCRIPTION:

Al 0.005 max Cu 75.0-77.0 Fe 0.40 max Ni 1.0 P 0.02 max Pb 5.5-7.0 S 0.08 max Sb 0.25 max Si 0.005 max Sn 2.0-3.0 Zn 13.0-17.0 Other Cu may include Ni; for continuous castings, P 1.5 max.

THE COVER BECOMES A CONDUCTOR OF THE PARTICLE ACTIVITY THAT IS GENERATED ON THE ROTARY MAGNETS AND SERVES AS AN INCOMING AND OUTGOING POINT OF MAGNETIC TRANSFERENCE.

8) ALUMINUM TUBE SECURED TO BOTTOM SURFACE OF PART #7, MEASURING 21/2" O.D., 1-3/8" I.D. by 1" THICK

9) TOP BRONZE BUSHING, 1-3/4" LONG, 1-3/8" O.D. BY 1" I.D.

10) A 1-3/4" LONG BY 7/8" I.D. BY 1" O.D. TEFLON SLEAVE BEARING, GLASS FILLED, PRESSED ONTO TOP OF CENTER SHAFT.

11) ONE TOP 1/4" KEY SLOT AND KEY TO SECURE ALUMINUM ROTOR PLATE TO SHAFT #6.

12) TOP ALUMINUM ROTOR PLATE, 13" DIA. WITH 1" BORE, 1" THICK

13) ONE BOTTOM 1/4" KEY SLOT AND KEY TO SECURE ALUMINUM ROTOR PLATE TO SHAFT #6

14) BOTTOM ALUMINUM ROTOR PLATE, 13" DIA. WITH 1" BORE, 1" THICK.

15) TUBE HELD TO CENTER SHAFT BY PARTS #12 AND #14 MADE OF 83% COPPER, 3% ZINC, 7% TIN, AND 7% LEAD. TUBE MEASURES 8" HIGH, 14-5/8" O.D., 7/8" WALL THICKNESS

16) THIN PLASTIC TAPE PLACED BETWEEN PARTS #12 AND #14 AS THEY ARE PRESSED INTO TUBE #15

17) ARE TEN TOP GROOVES CUT INTO TUBE #15 EQUALLY SPACED, MEASURING 4" HIGH, 2-1/32" WIDE BY .300" DEEP.

18) ARE TEN BOTTOM GROOVES CUT INTO TUBE #15 EQUALLY SPACED AND ADVANCED FROM TOP GROOVES BY HALF OF GROOVE SIZE, ALSO MEASURING 4" HIGH, 2-1/32" WIDE BY .300 DEEP.

19) A .300" WIDE SLOT CUT IN CENTER OF PART #15 FOR 360 DEGREES, TO A DEPTH OF 5/16"

20) TWO LAYERS OF MASKING TAPE PLACED INTO GROOVES #17 AND #18.

21) ARE 20 SETS OF 78 BENT COPPER WIRES PER SET, WIRES ARE COTTON COATED #19 WIRE (.036" THICK - COPPER, NO VARNISH). THESE WIRES ARE HELD IN PLACE BY PART #20 WITH THE COTTON INSULATION NOT REMOVED.

22) ARE 20 MAGNETS MADE OF ALNICO 5 SINTERED MATERIAL, (COOLED IN A MAGNETIC FIELD) M-1076; 8 AL, 14 Ni, 24 Co, 3 Cu, bal Fe. PEAK ENERGY PRODUCT OF 3.5. EACH MEASURING 3-7/8" HIGH, 1-7/8" WIDE BY 3/8" THICK, SECURED INTO GROOVES #17 AND #18 WITH BACK FACE OF MAGNETS DIRECTLY AGAINST COTTON COATING OF BENT WIRES #21

23) ARE 20 SETS OF 'WIRE WRAPS' PLACED AROUND THE 3/8" WIDE PERIMETER OF ALL 20 MAGNETS; THERE ARE 9 TURNS PER WRAP OF .032" THICK CLEAN COPPER COATED STEEL WIRE, MAKING FIRM CONTACT DIRECTLY TO MAGNETS

24) THE OUTSIDE SURFACES OF PARTS #23 MAKE FIRM CONTACT TO PARTS #21, THUS COTTON INSULATION IS REMOVED FROM BENT WIRES ONLY AT THIS POINT OF CONTACT.

25) THE TEN TOP SET OF WIRES #23 ARE CONNECTED WITH EXTENDED WIRES THAT GO FROM THE NORTH HALF OF THE 3/8" WIDE SURFACE TO THE SOUTH HALF OF THE WIRE SET WHICH IS NEXT TO IT, THUS FORMING A CLOSED LOOP CONNECTION TO THESE TEN SETS OF WIRES.

26) THE TEN BOTTOM SET OF WIRES #23 ARE ALSO CONNECTED WITH EXTENDED WIRES THAT GO FROM THE NORTH HALF OF THE 3/8" WIDE SURFACE TO THE SOUTH HALF OF THE WIRE SET WHICH IS NEXT TO IT THUS FORMING A CLOSED LOOP CONNECTION (NO CONTACT FROM TOP TO BOTTOM).

27) ARE 20 COPPER CONNECTING SLEAVES MEASURING 1/8" O.D. BY .032" I.D. BY 3/8" LONG TO JOIN WIRES #25 AND #26 BY ALLOWING THE STEEL CORE TO CONTACT STEEL TO STEEL AND THE COPPER EXTERIOR COATING TO BE CONNECTED COPPER TO COPPER,THUS MAINTAINING TWO INDEPENDENT FLOW CIRCUITS.

28) ARE TEN PIECES OF MYLAR INSULATION MEASURING 2-1/32" BY 5/16" BY .010" THICK, PLACED BETWEEN THE WRAPPED WIRES FROM THE UPPER MAGNETS TO THE LOWER MAGNETS, THUS THESE MAGNETS ARE LOCATED TO PRESS AGAINST THIS INSULATION WHICH IS LOCATED AT THE CENTER OF PART #19.

29) COPPER TUBE TO HOLD 10 COILS, TUBE MEASURES 151/2" I.D., MADE OF THREE PIECES OF 1/16" THICK COPPER RINGS, 8" HIGH.

30) TWO PIECES OF .002" THICK PAPER STRIPS, 8-1/8" WIDE, PLACED BETWEEN PARTS #29.

31) ONE PIECE OF .100" THICK MICA, 1/8" WIDE BY 8" LONG, PLACED AT THE SEAM OF COPPER TUBE TO MAINTAIN A SPLIT COPPER RING SPACING OF 100". THE NEEDED MAGNETIC ACTION IN THESE COPPER RINGS INTERACTS IN DIFFERENT DIRECTIONS IN A SIMULTANEOUS MANNER AS A RESULT OF THE FACT THAT A MAGNETIC FLOW (AS OPPOSED TO ELECTRICAL) IS DOUBLED IN SPEED CAUSED BY THE MICA SEPARATION OF THESE COPPER RINGS.

32) TEN 'LOCATOR GROOVES' CUT INTO THE TOP AND BOTTOM OF TUBE #29, EQUALLY SPACED FOR 360 DEGREES. EACH GROOVE COVERS A DISTANCE OF 3-1/8"FOR COIL PLACEMENT.

33) ARE 10 BOTTOM COILS OF NUMBER 16 COTTON COATED COPPER WIRE, (NO VARNISH) PLACED AROUND GROOVES #32 WITH 45 TURNS, SPACED CLOSELY - WIRE TO WIRE.

34) ARE 10 TOP COILS OF NUMBER 16 COTTON COATED COPPER WIRE (NO VARNISH) PLACED CENTERED ABOVE THE 45 TURNS AND NESTED INTO THE GROOVES OF THE BOTTOM COIL WITH 23 TURNS WHICH SPAN 11/2". AS THE BOTTOM COIL IS HAND WOUND, THE TOP COIL THEN GETS WOUND IN A 'REVERSE DIRECTION' THUS CAUSING A U SHAPED CONNECTION (NOT BROKEN) BETWEEN THE BOTTOM LAYER AND TOP LAYER FOR A TOTAL OF 95 FEET OF WIRE PER COIL.

35) CONNECTION PATTERN FOR THE TEN COILS IS A 1 TO 3 JUMPER CONNECTION PLACED FOR ALTERNATING COIL POLARITIES. (SEE SKETCH.)

36) ONE OF THE CONNECTIONS PART #35 IS OPENED AFTER A CHARGING SEQUENCE OF 67 SECONDS AT 1850 R.P.M. AND THEN GENERATED ENERGY IS CONTINUOUSLY EXTRACTED WITH THE LOAD BECOMING THE ACTIVATING DRIVING FORCE THUS SERVING AS A REPLACEMENT FOR THE JUMPER CONNECTION.

37) VERTICAL ALUMINUM 'TUBE MEASURING 16-1/8" I.D., 7/8" THICK WALL AND 101/2" HIGH. COILS #34 ARE UP AGAINST THIS TUBE'S INNER SURFACE WITH ONLY MASKING TAPE BETWEEN, THUS THE COILS ARE THE ONLY SUPPORT FOR PART #29. THIS ALUMINUM TUBE SERVES TO COMPLETE THE NECESSARY MAGNETIC CIRCUIT BY ITS THICKNESS WHICH SERVES TO SUPPLY THE NEEDED THERMOS-BOTTLE EFFECT, PREVENTING THE ESCAPE OF USEFUL MAGNETIC ENERGY AND ALSO AFFORDING EXIT POINTS FOR UNWANTED STRUCTURES WHICH THEN RETURN TO THE EARTH'S BALANCE SYSTEM.

38) A MINIMUM CLEARANCE OF 1/8" UP TO 3/16" BETWEEN THE INNER SURFACE OF TOP COIL #34 AND MAGNETS #22. A MAGNETIC PARTICLE WIND BUILDS WITHIN THIS SPACING THUS SUPPLYING THE NEEDED CIRCULATION FOR MAXIMUM MAGNETIC ENERGY WITHDRAWAL

39) ARE 20 BRONZE METAL STRIPS MEASURING 4" LONG BY 1/8" WIDE BY 1/16" THICK, MADE OF 83% COPPER, 81/2% TIN, 51/2% LEAD AND 3% ZINC. EACH OF THESE METAL STRIPS GETS BONDED WITH CLEAR EPOXY GLUE TO THE TOP SURFACES OF THE BENT WIRES, PART #21 AND EXTENDS INWARD TO CONTACT THE WRAPPED WIRE PART #23, THEN RESTS AGAINST THE SIDE OF THE MAGNET. THIS METAL STRIP BUILDS, HOLDS AND RELEASES THE NEEDED MAGNETIC FIELD WHICH SUPPLIES THE RELEASE ACTION.

40) A COATING OF CLEAR ACRYLIC SECURED TO THE OUTER SURFACE OF THE ROTOR TO HOLD MAGNETS AND PARTS AS NEEDED.

41) THE ROTATIONAL DIRECTION IS COUNTER CLOCKWISE LOOKING AT THE UNIT FROM TOP DOWN.

42) NOTE- THE BENT WIRES PART #21, AT THEIR LEAD EDGE, DO NOT PROTRUDE PAST THE OUTER SURFACE OF PART #15. THEIR TRAIL EDGE IS 1/16" BELOW THESURFACE OF THE MAGNET WHICH ALLOWS STRIP #39 TO BE LOCATED TO NOT EXTEND OUTWARD PAST THE MAGNET WHEN PLACED ABOVE THESE BENT WIRES.

43) NYLON SET SCREWS TO SECURE PLATES #12 and #14 TO PART #15.

THIS CONCLUDES THE PARTS LIST.

How 50 HP Romag Generator Function.

2007-10-31T19:13:00.000+11:00

HOW THE UNIT FUNCTIONS

The Ro—Mag magnet motor/generator must be charged up by driving the main shaft at
1350 R.P.M. for 67 seconds. This charging process manifests as magnetic energy within the
10 coils of copper wire, the copper tube supporting these coils and the copper coated steel
wires wrapped around the magnets. This charging is accomplished while the ten coil
connection wires are making contact and setting up their alternating magnetic poles. After
the 67 second charging time one of these coil connection wires must be opened and this
circuit again completed through an energy draw process. As current is drawn from the ten
coils this ‘draw’ sets up magnetic poles which are a response between the rotor magnets and
the coils. This response then causes the main shaft to be rotated by the permanent magnets
as they attract and build a release field. Then the driver unit is disconnected allowing the unit
to rotate with the load being the activating driving force.
Do not use ‘electrical teaching’ to presuppose how much of an energy flow is allowed to
leave the coils by focusing on the wire size of these 10 coils. The magnetic current flow
being circuited out through the copper wire has no dependency on this wire’s inner
structure, in that the wire is only a point of transference where an exchange takes place,
while producing ‘no heating’ of the wires/coils. The fields of the magnets must be
maintained during their spin movement. These magnetic fields which are encapsulated are
achieved by the wiring system. The attract/release of the magnets is a function caused by
several factors. First, the magnets attract field between north and south is completed by
taking a crossing path of attract (top of one row to bottom of next, etc.). This action has the
effect of fields blending into fields, and a hold-back attract does not happen. Each time a
magnet set passes a coil an interchange of like energy between the coils around the magnets
and the generating coils sets-up neutral polarities which are ‘release fields' and prevents a
hold-back attract.
One important magnetic assembly is the circuitry that allows this interchange of energy. This
is a recycling of a stabilized magnetic/electro energy not electro/magnetic because the field
of force is not a case of electrical input, an input that created the magnetic, but rather a
build-up of magnetic energy which caused an energy thrust.
Page 3
In further defining the workings of this unit it is important to understand that although
electrical and magnetic (energy) work with similar attitudes, the manner in which they work
sets-up a differing energy effect. One of these effects is that magnetic structures want to
share their flow, compatible to the Universal Force, while electrical flow argues, (short
circuits, sparks, etc.). Because of this fact the working responses (within the unit) take place,
‘how they are needed’, and ‘when they are needed’ which results in a functioning unit. There
is a continuous transmutation process taking place whereby magnetic energy continually
generates an energy that manifests a measurable current. This ‘removed current’ is best
described as low voltage at very high amperage and if this energy is used to its maximum
potential then it will outproduce the power produced by a standard 50 H.P. electrical
generator.
With a constructed unit that functions continuously, there comes an awesome awareness
that by allowing the now set laws of physics to be changed error is corrected. We can then
discover that magnetism has a true value and is not an obscure by-product. From this mental
freedom will come discoveries heretofore unknown concerning magnetic fields.
The following are claims to summarize important points about the unit:
1) A magnetic powered device that utilizes a natural, neutral and universal magnetic energy
and makes the energy available for use to a different device that is designed to attract the
energy from this unit. For example, this Romag-Generator can power the Magnetic
Water Pump or the Pyramid Molecular Vibratory Exchanger Unit.
a) A device whereby a rotating portion is supported in an appropriate housing
b) Rotating portion being a rotor which has secured to it an array of magnets uniformly
spaced and that when properly charged cause motor rotation
c) Said rotor having secured to it coils of wire, properly arranged to encapsulate the fields
of the rotating magnets, which then produce an ongoing magnetic energy
d) Said rotor and parts being constructed from known metals that are necessary for the
conductive activity used in a magnetic circuit
e) Rotor in said unit having a particular spacing of magnets that produces the necessary
requirements to achieve the end result which when in action has a stop gauge effect
on the productive magnetic system
f) Part in said device being a stationary metal tube that creates a stabilizing boundary for
the magnetic field of the unit
g) Unit has a magnetically pressurized tube that serves as a magnetic reservoir whereby
magnetic energy is circuited, as needed, to coils for energy removal, i.e., power lighting
fixtures, pumps, etc.
h) Copper coils wrapped around said metal tube in such a manner as to respond to
rotating magnets causing continuous rotation. The device utilizes an attracting system
that freely converts magnetism, (from permanent magnets) into magnetic/electro
energy, utilizes and returns it to its original state.
i) The device has attracting system comprising a wiring arrangement whereby the
attracting force is caused to release at the needed release moment to allow continuous
rotation.
j) The device uses a rotational movement that includes a control means for accurately
maintaining the number of revolutions per minute.
k) The device has a means for activating the unit into motion.
Page 4
l) Further identified as a device wherewith the magnetic structures of the Earth, which
are universal in effect, are utilized to bring about the evolution necessary for the
discovery of the outer limits so that people and space can come together.
In the past, inventors have sent devices and drawings to Patent Offices claiming they had
invented perpetual motion. We state that this motor, which is driven totally by permanent
magnet power, in no way can be compared with perpetual motion in that the principle is not
the same. When perpetual motion is discussed, it is mentioned in terms of unknown factors
which produce an unknown force. Here, in this Ro-Mag Generator, the force of attract-
attract to attract-release within the magnetic structure can be observed, thereby producing
the generating force to turn the rotor which in turn produces the outflow of power. This
power source is not predicated on a continuous flow of energy but predicated on the
consistency of the transmutation process of the magnetic molecular structures within the
Earth’s pressure flow.

Romag Generator Explained by Dave Squires

2007-10-24T21:32:00.000+10:00

50 HP Romag Generator Diagram

2007-10-24T21:25:00.001+10:00

50 HP Romag Generator

2007-10-16T23:08:00.000+10:00

42
ROMAG-GENERATOR

• Produces magnetic current equivalent of 50 H.P. output
• Suggested use is for running magnetic devices including the Magnetic Water
Pump and the Pyramid Molecular Vibratory Exchanger Unit
• Requires startup spinning to achieve 1850 RPM
• Requires special sintered magnets
ABSTRACT
The Earth is surrounded with a sea of energy that is pulsing and is constantly being supplied
by a Universal energy system. This energy field that we call the Ionosphere supplies all of the energy
needs on our planet. Like the other units we have presented, this Romag-Generator taps into this
energy field, converts the energy into something that we can use, and then releases the energy back
into the system. This unit, like the others, recycles the Earth's magnetic energy, in fact, all these units
cannot function if the energy is not getting recycled because the buildup of energy causes them to
stop working.
When we present machinery that connects to the Universal energy mechanism, we are
opening a whole new world. These concepts are nothing new, but we have yet to see them
implemented in our societies. This technology is so far beyond electricity is its versatility and
applications, there is absolutely no comparison. Magnetic energy can manifest as force fields, as
fields with various characteristics like weightlessness; it can be transmitted through air and space, it
can replicate other energy or matter, it can change the characteristics of energy and matter, it can be
blended with various elements to produce various results like heat and cold, it can convert matter
like garbage into a more pure energy, and the list goes on and on.
Magnetic energy is not confined to the simple force people observe between two magnets.
Magnetic energy is more accurately described as an infinite variety of energy manifestations that are
multidimensional in nature. This unit would have absolutely no connection to the Ionosphere if
magnets were as simple as most people think. When magnets are spun at the proper speed and their
fields are harnessed with the proper elements, they produce a frequency very similar to the
ionosphere, and something magical happens. Because of the Universal phenomenon of attractattract
(where similar energies are attracted to each other), energy structures in the ionosphere begin
to gather and swirl into a vortex as the unit attracts them. The small signal generated by the unit
travels at a speed beyond space and time, and energy structures similar to it are attracted to it at the
same velocity. This attract-attract phenomenon allows magnets to assist in a tremendous amount of
energy generation. This motor is a magnetic device incorporating the use of permanent magnets
turning in a rotor to generate a magnetic/electro energy which is then circuited to other mechanisms
to do useful work.
PRINCIPLE BEHIND THIS ENERGY SOURCE
This motor attracts neutral magnetic energy into the rotor magnets, sets up a response
between various components which then complete a circuit that becomes the driving force to turn
the structure.
SUMMARY OF THE DEVICE
An important objective of the present invention is to provide a revolutionary new concept
concerning the utilization of power by directly capitalizing on the natural resource phenomenon of
magnetism. Electrical power is the result of expending energy to drive a copper wire through a
magnetic field. But magnetic energy is a natural resource needing a specific mechanism to draw on.
There is no incorporation of a secondary energy source, except at start-up, to cause this
magnetic/electro unit to continuously function.

Control Factor Formula

2007-10-16T23:02:00.000+10:00

The Control Factor
Formula:
C - 2 + 14z = 710Y + 409 430
OUT OF BALANCE!
Note: We were given the majority of this information in
1985.
This formula describes a molecular structure just outside
the earth's rim that is the CONTROL FACTOR that governs the
complete particle interchange process of our solar system.
The balanced formula is given as C - 2 + 14 14z = 710Y +
409 409, however the current situation on our planet has the formula
reading something like
C - 2 + 14 14z = 710Y + 430 – which is out of balance.
Two main technological advances, electricity and
radioactive particle production (and the spreading of those
particles through explosions, power plants, etc.), are creating an
imbalance in this formula. Evidence of this imbalance is
becoming more and more apparent. The ozone holes (which
continue to worsen), the increase in storms, earthquakes, and
volcanic eruptions; the gravitational fluctuations and the sun’s
erratic behavior are all indications of a serious imbalance in the
system. We will briefly discuss this evidence of imbalance.
The ionosphere is not merely an "ozone layer" or "invisible
gases" but it is a rim of pulsing neutrons that is the
DISTRIBUTION ZONE for the energy that supplies this planet.
Electrical power plants are now forming ionospheric neutrons
into electricity at a rate whereby the FEED SOURCE that provides
our planet with energy cannot sustain this protective rim, thus
ozone depletion is happening. REPEAT: ELECTRICITY IS THE
PRIMARY CAUSE OF OZONE DEPLETION. It is imperative to
generate energy from a natural attract-attract principle. People
will soon be able to observe the core structure of the electron,
then the need to stop generating electricity will be well
understood because the effects of electricity will be clearly
observable.
The molecular structure C - 2 + 14 14z = 710Y + 409
governs the conditions within the entire earth system, including
the conditions of our atmosphere. As this governing molecular
structure is affected by electricity and radioactive particle
production, our environment reaps the consequences. For
example, storms start as an imbalance in the magnetic field that
creates the physical manifestations (tornadoes, hurricanes,
lightning, etc.) that are attempts to regain balance. The storms
will get worse as humans throw off the magnetic harmonies of
the earth with more and more destructive technology. REPEAT:
THE EARTH’S MAGNETIC REBALANCING IS THE PRIMARY CAUSE
FOR THE INCREASE IN VORTEXUAL STORMS.
Like wise, almost all geological activity is the result of the
earth regaining or reestablishing balance in the magnetic grid.
The earth depends on atomic consistency in the elemental
vibrations. Humans have created elements that do not occur in
nature and then humans spread those elements throughout the
system. This radical molecular contamination is far more serious
than scientists have realized. The future of our species depends
on redistribution or nucleic breakdown of radioactive particles.
THERE IS A DIRECT CORRELATION BETWEEN HUMANS
THROWING OFF THE PLANET’S ENERGY GRID AND THE
UPHEAVEL OF THE ELEMENTS TO REGAIN BALANCE.
The energy exchange between the earth and sun is
continuous and largely interdependent. The conditions on earth
are reflected by the sun and visa versa. The earth and sun will
purge the system of radioactive waste and a new magnetic grid
will be established for earth.
The variables in this formula (C, z, & Y) represent energies
that are constantly changing to keep both sides of the equation
in perfect balance. This formula represents a system in motion.
The molecular structure (represented by this formula) is
designed to keep perfect harmony between the Center Point or
KING PIN, around which the total Universe takes its preordained
course, and the Earth. The left side is the energy from the
Universe coming into our Solar System and the right side is the
manifestation of that energy. The problem is that we are
currently experiencing an imbalance of energy on earth because
of our technological influence. This imbalance is causing an
unwanted change to the Y part of the formula. Fusion, fission,
and electricity are creating harmonic rifts in the Universal
tapestry that must be mended.
The impact of electricity and radioactive particles is now
responsible for the destructive distortion of the 710 units of
combustible factors. Humans have misused natural forces to
create unnatural elements, which are now a major contributing
factor to the timing of the DRASTIC EARTH CHANGES that are
about to occur. The earth, and the system it is part of, is in the
process of rebalancing itself with a pole shift and a series of
gravitational/energetic changes. Some people will say that God is
punishing the people on earth for their sins, but nothing could be
further from the truth. The current and coming earth changes are
critical to our survival.
We will try to explain the formula further:
At this stage of our human understanding this formula
serves more as an explanatory tool of the workings of our solar
system, compared to a scientific equation for taking
measurements.
C is the magnetic light, in this instance, without
considering time and space.
- 2 is the number of planets Earth is away from the center of
our Solar System, identified as Z or Jupiter.
+14z is Jupiter at 14°, the 14 being the magnetic light arc as
it travels from the center, Jupiter, to the Earth at a 14° angular.
The Z represents the units of magnetic energy coming from
Jupiter to earth.
When the left side of the equation is calculated, it equals
710 units of combustible factors; these factors are multiplied
with Y. All of the combinations of combustible factors result in
the production of 409 elements that structure the Universe.
Y is the combustible factor of the elements. Y represents
every energy polarity or signature necessary for the
manifestation and redistribution of any molecular combination. Y
helps organize the 710 combustible factors into the 409 elements
that make up the physical world. Everything that exists within
our planetary system has a specific energy vibration that keeps
every group of molecules together or allows them to separate –
these energy vibrations are represented as Y. All elements have
a specific energy combination that can be formulated or broken
down. All elements are combustible with the right energy field or
polarity. The magnetic lock that holds all molecules together can
be opened or closed with the proper energy field, and this
process does not require heat as we are used to thinking. Of
course all elements can be burned with high enough heat, but
that is not the kind of combustion we are talking about. The
combustible factors can transmute elements into the preordained
patterns that are imprinted on their molecular
templates or break down the molecular structures into a more
neutral polarity. The process is continuous and the number of
energy polarities represented by Y adjusts as necessary.
Humans have used destructive technology to force certain
molecules to separate and join in a manner that does not
naturally occur. This violation of natural law produces drastic
consequences that the system must rectify.
The 710 combustible factors are variations of magnetic
energy and are concentrated in our atmosphere. These
combustible factors are combinations of earth, air, sound, speed
and light and they provide the polarities to form the 409 elements
of the physical world. We are not experiencing many elements
available to us at this time. Living energy systems on earth must
exist within these combustible factors to operate at full
potential. If a living energy system attempts to exist or operate
outside of the ionoshere, it will not maintain normal functioning.
For example, if humans leave our atmosphere and do not have
the appropriate energy field on their spacecraft, their bodies will
not function properly. Gravity, or compressed magnetism, is the
overseeing force that allows the combustible factors and
elements to exist.
The letter C commonly denotes the speed of light in
scientific equations. The element light mentioned as one of the
factors of Y is not the light identified as "C" at the start of this
molecular structure equation. This is important to note. This
formula explains how pulsed light particles emitting from the
center of the Universe travel to our solar system at variable
'speeds' outside of time and space. This formula is primarily
concerned with how the high speed pulsed light energy,
represented as C, is transmuted into magnetic energy which then
creates a speed change that is considerably slower. This formed
magnetic energy is captured by our Solar System and is then
transmuted into an energy that supplies and sustains our Sun.
The light pulses then leave our Sun (and other stars) at about 4
times the speed of light waves (light waves are about 186,000
miles a second). The pulses elongate into waves when they come
into contact with something. This formula is primarily for our
Solar System. Contrary to popular opinion, Jupiter, not the Sun,
should be seen as the center of our Solar System when trying to
understand the energy dynamics of the system. To understand
the full impact of the formula, it is necessary to look at the solar
system with Jupiter as the center.
Again, a nearly infinite number of combinations of the 710
units of combustible factors produce a nearly infinite number of
combinations of the 409 elements (which are a combination of
earth, air, sound, speed, and light). The left side of the equation
is designed to equal the right side: near infinity = near infinity.
This formula is in keeping with the fact that, "All energy was and
is created ongoing from the SOURCE of all." Note that the
primary energy force in the Universal system is the vortex.
The presently held LAW of entropy is completely false. All
magnetic molecular structures are in a constant state of change
forming and re-forming with the action always resulting in 100%
efficiency. All universal systems proceed to take their prescribed
course of action with pre-ordained precision from the Creator
Force, utilizing a process of time during the forming and
reforming of structures until 'given evolution' results. Yes,
scientists have observed randomness in the cosmos, and they
believe the events they observe have no order, however, the
randomness is not RANDOM. The Universe functions perfectly in
a PATTERN AS NEEDED while repeating in a random sequence.
As the scientific community makes advances in the field of
magnetic pulse detection, people will be able to monitor exactly
how many units of combustible factors arrive here from Jupiter
at any given moment, thereby maintaining the Earth's energy
needs. People will observe that the energy from Jupiter is then
used by the Earth as needed, and the Earth simultaneously
imparts energy to our Sun where it helps to sustain the Sun's
energy that is again returned to Earth. The Earth is the vacuum
of our planetary system, the final point where energy is recycled
back into the Universal system. The pollution produced on Earth
affects not only our planet, but other planetary systems as well.
Contaminated magnetic energy travels from our planet
instantaneously to other systems forcing other beings to cope
with our pollution. We are truly connected to a much larger
community than we like to think.
We must stop seeing our Earth as an independent, isolated
and non-contributing part of this Universe. We must begin to
understand that we can no longer move against nature but we
must now utilize what is being offered for the benefit of the
world. We have long overlooked, through greed, the use of FREE
magnetic energy, and the time to expand our minds is now at
hand because our planet is soon to find itself extinct if we do
not.

How Mini Romag Function

2007-10-14T20:54:00.000+10:00

Original Note
The here disclosed 3½ volt, 7 amperage magnet motor/generator must be charged up by
driving the main shaft at 2100 RPM for 42 seconds. This charging process manifests as magnetic
energy within the six coils of copper wire, the copper tube supporting these coils and the copper
coated steel wires wrapped around the magnets. This charging is accomplished while the six coil
connection wires, Part #22, are making contact and setting up their alternating magnetic poles. After
the 42 second charging time one of these coil connection wires must be opened and this circuit
again completed through an energy draw at what could be called 7 amps. See load Part #23. As
current is drawn from the six coils, this draw sets up magnetic poles which are a response between
the rotor magnets and the coils. This response then causes the main shaft to be rotated by the 12
permanent magnets as they attract and build a release field. Then the driver unit (hand crank) is
disconnected allowing the unit to rotate with the load being the activating driving force.
49
The fields of the magnets must be maintained during their spin movement. These magnetic
fields which are encapsulated are achieved by the wiring system. The attract/release of the magnets
is a function of several factors. First, the magnets attract field between north and south is completed
by taking a crossing path of attract (top of one row to bottom of next, etc.). This action has the
effect of fields blending into fields, and a hold—back attract does not happen. Each time a magnet
set passes a coil an interchange of like energy between the coils around the magnets and the
generating coils sets—up neutral polarities which are ‘release fields’ and prevents a hold—back
attract.
One important magnetic assembly is the circuitry which allows this interchange of energy.
This is a recycling of a stabilized magnetic/electro energy not electro/magnetic because the field of
force is not a case of electrical input, an input that created the magnetic energy, but rather a build—
up of magnetic energy which caused an energy thrust.
In further defining the workings of this unit it is important to understand that although electrical
and magnetic (energy) work with similar attitudes, the manner in which they work sets—up a
differing energy effect. One of these effects is that magnetic structures want to share their f1ow,
compatible to the Universal Force, while electrical flow argues, (short circuits, sparks, etc.). Because
of this fact the working responses (within the unit) take place, how they are needed, and when they
are needed which results in a functioning unit. There is a continuous transmutation process taking
place whereby magnetic energy continually generates an energy that manifests a measurable current.
In the past, inventors have sent devices and drawings to Patent Offices claiming they had
invented perpetual motion. This motor, which is driven totally by permanent magnet power, in no
way can be compared with perpetual notion in that the principle is not the same. When perpetual
motion is discussed, it is mentioned in terms of unknown factors which produce an unknown force.
Here, in this Mini Ro—Mag, the force of attract—attract to attract—release within the magnetic
structure can be observed, thereby producing the generating force to turn the rotor which in turn
produces the outflow of power. This power source is not predicated on a continuous flow of energy
but predicated on the consistency of the transmutation process of the magnetic molecular structures
within the Earth's pressure flow.
Some additional points may be useful in understanding the functioning of this unit. The thin
web of brass between the magnets is important because it acts somewhat like a magnetic insulator.
Each section of brass, on the sides of the magnets becomes charged, somewhat like a capacitor. This
builds into a force which TAKES PART in causing the rotations.
The magnets have a particularly low charge, but their charge is only a catalyst at the onset. It
is during the SPIN charging that this blend of alnico elements draws neutral magnetism from the
atmosphere that then manifests with the proper magnet strength for continuous running. This 2.2
peak energy product is the power needed that becomes a point of INCOMING and OUTGOING
magnetic transference. Too much charge would solidify
polarities that would then negate the needed VARIETIES of DIFFERENT magnetic
fields.
This mini-Romag unit cannot run horizontally. The magnetism of the earth system FEEDS
this unit from the top. Gravity is compressed magnetism. The spinning rotor CAPTURES this
compressed magnetism.
Without the copper coated steel wire around the magnets no activity
would take place and here is why. As the rotor is spun, an action that MUST
happen is that the fields around the magnets need to stay with the magnets.
These fields do not manifest as individual flux lines if the magnets are not
wrapped as disclosed. The copper-coated steel wire becomes a MAGNETIC
CONTAINMENT FIELD as these wires take on THEIR OWN charge. These SETUP
fields then serve as ISOLATOR fields which keep the magnets' flux lines in
their place.
The reason these copper-coated steel wires need no insulation is because the
COPPER COATING ITSELF builds into a magnetic flow, which insulates the
primary flow that travels inside the steel portion. This action results in
a magnetic flow circuit that is GUIDED by the activity of the copper
coating. This action should serve as a TEACHING to show how magnetic
current can be sent through conductors that are TOTALLY UNLIKE the standard
electrical insulators. The primary USE of this field (set up by these wires) is that it serves as a
RELEASE AGENT that breaks the elastic hold-back during the generating cycle.
The reason for the U-bent wires is that they serve as a CONDUIT that causes
the magnets flux lines to take their travel path very close to the magnet. This circuit path is around
the back surface and both side edges. This action can be likened to compressing a balloon. The
result is that the field on the front or WORK SURFACE is greatly extended OUTWARD. This
outward extension impacts the copper stator core, which then FEEDS captured magnetic current
into the stator windings.

Mini Romag Generator Spec

2007-10-13T15:02:00.000+10:00

MINI-ROMAG GENERATOR

• Produces 3-1/2 volts, 7 amps
• Requires startup of 2100 RPM for 42 seconds
• Suggested use: Battery Charging, lighting, powering devices.
• All materials are readily available
• Required load for continuous operation

This motor is a magnetic device incorporating the use of permanent magnets turning with a rotor to generate a magnetic/electro energy which is then circuited to other mechanisms to do useful work.This unit demonstrates that magnetic principles can be utilized in units of various sizes.

Magnetic units can be microscopic or a mile wide, as long as the correct principles are maintained. When magnetic fields are properly harnessed, when the magnets and housing are a certain
composition, when the magnets are rotating at the proper rpm, and when the energy is given a redistribution path, a very powerful phenomenon occurs; the natural flow of Universal magnetic
energy begins to escalate.

All magnets draw energy in to maintain their power, but under the right conditions magnets can assist in attracting large quantities of magnetic energy that can be used for numerous purposes.

Instrument For Testing

2007-10-12T17:45:00.000+10:00

When testing and/or researching within this field, it is always better using oscilloscope as it allows one to see the wave pattern thus allowing one obtain a more satisfactory result in comparison to using an analog or digital amp/volt multimeter as it may lead to incorrect results. However a digital/analog multi-test would produce accurate results if the signal is consistent.

Romag Generator

2007-10-12T17:07:00.001+10:00

First of all, I would suggest that one should have a more creative and open mind as to utilizing the usual Romag plan as the information may not possibly be 100 % correct as many variable factors, such as someone tampering with it, can alter the results. Generally, I have been investigating the magnetic characteristics and behaviours for many years. Recently I have noticed a number of websites attempting to explain the fundamental principles as to how the Romag functions, yet there has been no clear evidence as a function unit. In the previous year I have requested a special order for alnico 4 magnets from a respected manufacturer in a bulk order (As you know one would require to order am large quantity to purchase these goods). As a result, I have a number of these magnets stocked.